In between starting the last battery box and installing it the pump on this dump trailer died so I installed a new one for the customer. He decided he wanted a bigger box to hold everything together and keep the new pump out of the elements, so here we are. Nice change doing some fab work and tigging aluminum, I haven't done a lot of that for a good while. Do you need some Heavy Equipment repairs done by a mobile welder? Or a custom project fabricated? We are located in the C

Auction bucket re lug. The customer got a good deal on this bucket at the auction, but their machine has a very oddball quick change. I templated another one of his buckets, measured the quick change and templated the new bucket so I could work it all together. A little CardboardAD and ComputerAD and Pacific Bending in 100 Mile was able to cut me some nice clean lug profiles. Do you need some Heavy Equipment repairs done by a mobile welder? Or a custom project fabricated? We

This thumb had seen better days for sure. Fabricated some new tips / extensions and fit them on. The left side was especially worn so the new pieces ended up being asymmetrical to try and make up for the difference, the tips were within an ⅛ in every measurable dimension which is what matters. Do you need some Heavy Equipment repairs done by a mobile welder? Or a custom project fabricated? We are located in the Cariboo east of 100 Mile House and willing to take our mobile ser

Tight timelines and tight budgets, again. "Cold formed" the floor to make timelines and save some money, otherwise a fairly standard...

Original plan was new tips and fix up the outrigger. As to be expected there was a bunch of cracks in the grapple, the boom crack wasn't...

Someone played bumper cars with the rock truck so I was tasked with making it as close to new as possible without replacing it. Couple...

Brand new Kenworth with one trip on it but the risers that came installed weren't quite cutting it for the low boy set up. I cut apart...

Taking some time to organize and clean, both the truck and the shop today. Having a bender means I can pretty quickly knock out a slick...

I did a big retrofit on this ramp last fall. The job went well and it was bang on to the plan, the problem was the plan didn't work as...

A few before and after on the barge ramp refit that wrapped last week. This mobile welding job was a challenge but it was fun. The...

Hand cut plate, completely free hand slot. Do you need some Heavy Equipment repairs done by a Fraser Valley fabricator mobile welder? Or...

Part 2 of the plan, re lugging the grapple so it can be used on the new quick change set up, or any of the customers other machines. Do...

Working with Backwoods Mechanical to add a quick change and thumb to machine which was set up strictly as a pin on grapple before. Had...

Just the tip, or in this case 3. This thumb was straight up worn down to nothing. I used some cad and hand drawing to come up with a...

Track bar link mount repair from a couple weeks ago, The original bracket was cast and beyond repair. They wanted it done yesterday and...

My new torch reel arrived last week so this weekend I spent some time cleaning up the torch cabinet. Every efficiency increase makes the...

Finally finished and mounted the home made air reel to the truck, I think it will be a nice quality of life addition while out working...

A little rust repair / Flintstones floor delete in a side by side. Took a little Carboard Assisted Design in the shop, some bending...

Bent in house out of 14 gauge. Contact us today about your next project or repair! mike@burntbeardfab.ca 604-997-0327

I designed, fabricated, welded and painted everything for this custom 2001 F350 Flat deck. Contact us today about your next project or...