A long awaited shop equipment upgrade! The first step was converting the loader to a universal skid steer attachment to make adding new pieces easy and change overs fast. The old Massey doesn't exactly have modern universal spacing so blank attachment plates and cutom brackets were required. I had just enough ½ plate kicking around to make brackets. I had to layout and cut by hand and mag drill the pin holes, no fancy cnc anything on this job. Do you need some Heavy Equipment

Surprisingly enough, t his was my first time installing catwalks / underguarding. The job went pretty smooth and the parts fit quite nice, they needed to be cut to length for the size of machine, but minimal screwing around otherwise. Do you need some Heavy Equipment repairs done by a mobile welder? Or a custom project fabricated? We are located in the Cariboo east of 100 Mile House and willing to take our mobile service truck off the beaten path to get the job done. Contact

The knives on this unit were definitely well used, with lots of wear on the non consumable parts as a result. A bit of build up was required in a few spots, and a few cracks needed to be fixed, but it looks pretty good now. The customer didn't want to go nuts with rebuilding everything, but it should be good and servicable for a while longer. There were a bunch of parts variations for this model, and even the second try for the top knife wasn't quite right. A little heat and

Call came in Friday afternoon that this low bed had broken while they were loading it, now its ready to roll for early Monday . Bit of a...

Welding repairs on a Snow Groomer

Tight timelines and tight budgets, again. "Cold formed" the floor to make timelines and save some money, otherwise a fairly standard...

Onto a new adventure! My wife and I were born and raised in the Fraser Valley and have lived there for the last 30 something years. We...

Wrapped up a big one today. Complete overhaul on the front end of this 870 bucket. Fixed numerous cracks in the frog, built up worn...

Cutting up scraps, crops and used cutting edges to make this bucket as good as possible. A bit more time put in but the customer has all...

New edge and heel straps to keep this bucket going for a good while longer. Owner had had bad luck with bolt on edges not lasting a...

Another bucket re lug. Originally we wanted to take the good lugs off the trashed bucket and re use them, they looked really close but...

New tips, some hard surfacing touch up, and a few other little fixes. Customer provided some hardened bar stock meant for cylinders so I...

Going into this job I was planning on having these plates cnc'd, it would have been the most economical option by far, unfortunately that...

A long day to bang this repair out and keep it on budget. I would need more fingers and toes to count the repairs on the tube in the...

A ton of build up with with a healthy covering of hard surfacing for this thumb. The heat cycling exposed a few cracks so I fixed those...